Shopping Cart

Mould 410

Mould 410
Mould 410
Mould 410
weight-icon

Suggested weight range

60-80kg

length-icon

Boat Overall Length

12.80m

The design, length and stability of this hull makes Mould 410 one of the favourite boat shapes for Australian school coaches. The design allows this boat to be used as both a light-medium schoolboy coxless four and quad, and a schoolgirl coxed four and quad with great success. Mould 410 has won countless national championships and Heads of the River in schoolboy and schoolgirl categories.

For pricing, please see our Coxed Fours & Quads page.


Spectra Steering System Through Bulkhead image

Spectra Steering System Through Bulkhead

Spectra is a Kevlar-based product that is corrosion-proof and easy to use. Compared to the stainless steel wiring mechanism, the spectra system is lighter, more durable, corrosion proof and it does not stretch. A great innovation by Sykes. The Mould 410 stern deck join features a more modern appearance where the steering cable feeds through the bulkhead.

Splashguard & Continuous Height Rigger Flange image

Splashguard & Continuous Height Rigger Flange

This mould has a continuous rigger flange height and a rounded and diminished splashguard. The higher saxboard along the cockpit adds to longitudinal stiffness in the hull so that the boat will sag less in the water when the rower sits in it, allowing for greater run. Due to the lower flange at the point of the hull, the feet of the rigger are longer so that the rigger is elevated to clear the toes of the shoes. These features also allow for the hull to be easily packaged and loaded onto the trailer.

Stern Deck Join With Bulkhead And Hull image

Stern Deck Join With Bulkhead And Hull

One of the most notable features of this mould is the clear finish of the carbon bulkhead and how that joins with both the stern deck and the hull itself. Both joins are strong and water-tightness can be easily assured. On the deck, the bulkhead piece overlaps with the deck in a nice clean line. With the hull, the stern bulkhead has a more robust join to keep the saxboards from splaying over time and to assure a water-tight join every time.

Dual Locking Backarm image

Dual Locking Backarm

The new sliding adjustable type back arms have a dual locking system. The 6mm bolt locks the backarm in place via an internal nut. The large ribbed plastic locknut is then tightened against the end of the back arm tube. This gives secondary support and ensures the force is well supported. The adjustment range is 70mm which easily allows for span changes on the rigger.

Pin Block Measuring Tapes image

Pin Block Measuring Tapes

All Sykes boats come with span/spread measuring tapes applied on the pin block below each oarlock pin.

Waterbottle Holder image

Waterbottle Holder

In the stern-end bulkhead under each seat deck a, is a standard bicycle-sized water bottle holder. Whilst fitted as a standard feature, they add approx. 440grm to the total weight of the hull.

Make an enquiry

Enquire now arrow-right


Sale

Unavailable

Sold Out